• The design speciality of these pumps allows pumping out certain amount of mud, dirt and suspended solids.
• Suitable for handling water and non corrosive liquids having temperature up to 60°C
• Non clog and semi open type impeller enables to handle solids of 7 to 40 mm as per model.
• Back pull out design enable to service without disturbing the pipe line.
• Easy maintenance with interchangeable parts and separate gland cover.

Applications

• Suitable for Pumping muddy water, Sewage, Polluted liquids including solids etc.
• Dewatering Docks, Ports, Vessels, Swamps, Basements, Trenches, Construction sites, Swimming pools etc.
• Transfer for Chemicals, Solvents, Effluents, Hot water, Chilled water, Condensate etc.

• Chemical Process pumps having top centerline discharge, self-venting casing, arranged for back pull-out.
• Fully confined gasket.
• Foot support under casing for maximum resistance to misalignment and distortion from pipe loads.
• ANSI-B-16.5 (Class 150) flanges standard, ANSI-B-16.5 (Class 300) optional for working pressures to 2550 kPa with 3 mm corrosion allowance.
• For Maximum Corrosion-erosion resistance casing is supplied without tapped openings but gauge and drain plug openings are provided when specified
• Pump Impeller matched to casing for high efficiency and low NPSH.
• Pumps having a single piece shaft is designed for 0.05 mm maximum deflection at stuffing box face. All critical surfaces ground to less than 0.8 micron.
• Our process pumps are designed with encloses back of causing and contains stuffing box chamber.

• Exceptional leak tightness across the ports and to atmosphere.
• Environmentally safe and energy efficient.
• Long time Maintenance Free, no wear on sealing surfaces.
• Insensitive to impurities due to maintenance free sealing system.
• High Return on Investment across full service life compared to Globe Valves
• Valve rings are replaceable in the line.
• Excellent control statistics.